How to manage your Sonos system with iPhone and iPad

How to use for and

With Sonos and your iPhone or , you can set up the speaker system of your dreams!

Sonos has the fantastic ability to be as big, powerful, and complex as you want it to be. If you want an entire sound system that covers your house, or just a simple on speaker setup for your living room, you can easily modify your Sonos system into your perfect dream system.

How to add a speaker to your Sonos system with iPhone and iPadHow to group Sonos speakers with iPhone and iPadHow to stereo pair Sonos speakers with iPhone and iPadHow to separate a stereo pair Sonos speakers with iPhone and iPadHow to disconnect a speaker from your Sonos system for iPhone and iPad

How to add a speaker to your Sonos system with iPhone and iPad

Sonos allows for up to 32 components to be connected to one Sonos system — likely a mix of speakers, playbars, and subwoofers. So even though you may have started out with one Sonos speaker in your living room, it’s easy to expand your sound system into different rooms by adding new components to the Sonos network.

Launch the Sonos Controller app from your Home screen.Tap on the menu button. It’s the button that look like ☰ in the top left corner of your screen.Tap on settings in the menu.

Tap on Add a Player or SUB button.

Launch the Sonos Controller app, tap on the menu button, tap on settings and then tap on add a player or SUB.

Tap Next on the Connect To Power screen. Make sure your Sonos is plugged in before you continue!Tap Next on the bottom right of the screen, after you have seen the green light flashing on your Sonos speaker. The indicator or the mute/play/pause button may be flashing. If you don’t see the green flashing light, tap I’m unsure about the light; however, it may then prompt you to create a wired setup, which is kind of a pain in the butt.

Tap on Set Up This Player.

Plug in your Sonos speaker, tap next, and then tap next again once you see the green flashing light

Press the Mute/Play/Pause button and the increase volume button on your Sonos simultaneously and you should hear a noise. Tap on the Next button.

Choose a room to label your Sonos.

Press the Mute/Play/Pause button and the increase volume button simultanesouly, tap on the next button, then choose a room.

Tap Next after you choose a room.Tap Not Now in order to continue. If you wanted to add yet another speaker you could do so now but tapping Add Another Player.

Tap Next on the Trueplay screen.

Tap next after you choose a room, tap not now, and then tap next again.

If you want to set up Trueplay you can do it now or at anytime later. Since it’s not integral part of the setup process we will skip it for now. Tap Next on the Trueplay tuning skipped screen.Tap Done on the Setup complete screen.Tap not now to skip Trueplay tuning, tap next and then tap done.

You can repeat this process at anytime in order to add more components to your Sonos system.

How to group Sonos speakers with iPhone and iPad

Sonos gives you the ability to control multiple speakers right from the Sonos Controller app. The neat thing about Sonos is you can be playing different songs on different speakers at the same time. However, if your throwing a dinner party and having wine in your kitchen, and then move into the dining room, it may be weird if two different songs with two different moods are playing. Luckily, you can make all the speakers you want play the exact same music by grouping them.

Launch the Sonos controller app.Tap on the speaker you are currently controlling. This will be at the top of your screen in the middle.

Tap on the Group button of the speaker you want to group.

Launch the Donos Controller app, tap on the speaker you are currently controlling, tap on the group button.

Tap on the name of the speaker(s) you want in that group.

Tap on done in the top right corner of your screen.

Select the speakers you want to group together and then tap on the done button.

As you can see the speakers you selected are now playing the same music and will follow the same queue. Also don’t forget you can adjust the volume settings separately for each player in the group, this can be a real ear saver if you catch our drift.

If you every want to ungroup speakers just follow the same steps.

How to stereo pair Sonos speakers with iPhone and iPad

If you have two of the same Sonos speakers you can pair them together to create a stereo system. This will split the audio into left and right channels to give you a wider sound. Sonos suggests that for maximum effectiveness you have the two speakers approximately 8-10 feet apart from each other.

Launch the Sonos Controller app.Tap on the menu button. It’s the button that look like ☰ in the top left corner of your screen.

Tap on the settings button.

Launch the Sonos Controller app, tap on the menu button in the top left corner and then tap on the settings button.

Tap on room settingsTap on the room you want to create the stereo pair in.

Tap on Create Stereo Pair

Tap on room settings, tap on the room you want to create the stereo pair in, and then tap Create Stereo Pair button.

Tap Next on the create stereo pair screen. This will automatically show you the speakers that are capable of doing it. Tap on the name of the speaker you want to pair with.

Tap on the next button.

 Tap on the next button, tap the name of the speaker you want to pair with, and tap the next button again.

Press the volume increase button on the left speaker. The at the graphic provided on the screen if you are confused.Wait for the Stereo pair to configure.

Tap next on the stereo pair created screen.

Press the increase volume button on the left Sonos speaker, wait for it to configure and then tap on next.

Your stereo pair is now all set up! From here you can always tune your new stereo pair to Trueplay at anytime.

How to separate a stereo pair Sonos speakers with iPhone and iPad

If you aren’t liking a stereo pair you have created, or you just would like to move one of your speakers into a separate room, it’s very simple to disconnect a pair of paired speakers.

Launch the Sonos Controller app.Tap on the menu button. It’s the button that look like ☰ in the top left corner of your screen.

Tap on the settings button.

Launch the Sonos Controller app, tap on the menu button in the top left corner and then tap on the settings button.

Tap on room settingsTap on the speakers you want to separate.

Tap on Separate Stereo Pair

Tap on room settings, tap on the name of the speakers you want to separate, and then tap Separate Stereo Pair button.

Tap on the yes button.

<Tap on the Yes button.

This will disconnect the link between the two speakers and they will now work independently once again.

How to disconnect a speaker from your Sonos system for iPhone and iPad

If for any reason you ever wanted to disconnect a Sonos speaker from your Sonos network you are going to have to reset the speaker.

Unplug your speaker from it’s power source.Press and hold the Mute/Play/Pause button.Plug the speaker back in while still holding the Mute/Play/Pause button.Let go of the Mute/Play/Pause button when you see the orange flashing light.

Leave a Reply

Your email address will not be published. Required fields are marked *